Prototyping

Sort Alphabetically: on | off
CAP-XX designs and manufactures supercapacitors. Supercapacitors store electrical energy but can delver and receive much higher power than comparably sized batteries. We also provide a variety of power electronic design services.
RFI was first founded as a manufacturer of antennas in 1979 and since this time grown to be a leading R&D and manufacturing company in the field of wireless communications, ranging from antennas, combining systems through to active RF repeaters, amplifiers, receiver multiplexors and antenna system monitors.

We have also worked in collaboration with DSTO to develop a number of lightweight radio relay devices for UAV and balloon based applications. This R&D program has resulted in a Military UHF Tactical Airborne Transponder known as AUTRY, which has been deployed in Afganistan in UAV systems.

Building on the success of this program, RFI has been successful in securing a CTD (Capability Technology Demonstrator) grant from DOD/DSTO to further develop this capability for ground based and other UAV applications.

Jon Bradshaw

Consulting engineer

Silvertone Electronics

Australian UAV Technologies P/L trading as Silvertone Electronics is the designer, developer manufacturer and integrator of the Flamingo® Mk3 Remotely Piloted Aircraft.
The company has an over 40 year heritage in radio controlled aviation and has been involved under new management for the last 3 years in the newly specified Flamingo® Mk3.

It is involved in its integration with CISTECH Solutions ISR and Manet Communications systems for Military, Police and Emergency Services applications on a long endurance large payload platform due for demonstration in Q4 2017.
Delux-Leds is an Australian owned supplier of superb quality LED lighting to commercial, industrial and government customers.

Our products are engineered to last and utilise state of the art solid state LED lighting technologies & optic lenses for maximum light distribution and precise optical control.

Our innovative Delux-Leds Retrofit Kits allow upgrade of existing traditional lighting to LED. You do not need to replace your lighting fixtures (Streetlights, High Bays etc.) to gain all the benefits of LED lighting. Benefits include up to 70% reduction in energy costs, long life, low maintenance, smart controllability and better lighting!

Our Retrofit Kits provide excellent value when upgrading to LED by reducing capital costs, installation costs, and disposal costs whilst maintaining original aesthetics!

Coupled with permanently reduced energy & maintenance costs, our products provide a marathon of savings!

Unit 6, 3 Skyline Way, Gateshead, NSW, 2290
Ph: 02 4943 4548
Email: sales@delux-leds.com.au
We build connected hardware products that help your business grow.

We have completed projects for the RAAF and other defence clients.

We’re specialists in the design, development and manufacturing of medical devices, consumer wearables and industrial IoT products.
We're experts in Wireless technology, Electronics Design, Software and Sensors.

Sigma Air Conditioning

SIGMA is a world leader for over 30 years in the design, manufacture, supply and service of specialised air conditioning equipment suitable for the transportation rail, mining, industrial and defence industries, where high ambient temperatures, severe vibration, dense particulate and corrosive environments prevail.

SIGMA is a leading global company in the development of Transport and Heavy Duty HVAC Systems for the Rail, Mining, Industrial and the demanding Defence markets.

SIGMA provides a "whole of life" outlook for its products and provides tailored system solutions that deliver true value to our customers.
Saber Astronautics is a space engineering company conducting cutting edge R&D in the fields of operations and logistics. We design tools for the emerging commercial space industry and apply them to everyday challenges on Earth.

We apply artificial intelligence to reduce waste in systems, connect platforms with customers, and solve complex and dynamic challenges. We are customer focused, leveraging our expertise to provide solutions which solve the needs of end users. 

This positions us to provide unique solutions to traditional industries in a way which is flexible, timely, and at competitive rates.

Australian Centre for Space Engineering Research (ACSER), UNSW

Vision: To provide national leadership for space engineering research.


Purpose: To develop space capabilities relevant to Australia's needs through research, innovation and education.


ACSER was established in 2010 and aims to see the development of a sustainable space business ecosystem in Sydney. The centre has research strengths in satellite navigation, space systems and mission development.

Frazer-Nash Consultancy Limited

Frazer-Nash is a world class systems and engineering technology organisation. We have extensive experience in the provision of specialist services to the defence and aerospace communities. We work across the complete life cycle of projects supporting research and concept studies, design, assessment, assurance, in-service and disposal issues, covering land, air, sea and joint system programmes. We opened our Australian office in 2010 and provide high quality engineering services in four broad areas:
1. Design services ' concept design and innovation, mechanical, structural and electrical systems.
2. Analysis services ' control systems, software development, fluids and heat transfer, structural integrity analysis and signature management.
3. Systems engineering ' system requirements, technology roadmapping, concept studies, technology development and through life support.
4. Project support services ' safety and environmental, human factors, reliability and maintainability and independent technical audit.
Interfab, a proudly Australian owned company with over 30 years’ experience manufacturing precision sheetmetal components and assemblies.
Our advanced manufacturing platform commences with 3D design support using Solidworks, product simulation and BOM structure using an MRP designed specifically for our industry, then moves through our various state of the art manufacturing processes, including Combination Laser/Punch, NC Forming, Robotic Mig and Tig Welding and finally into mechanical and electrical assembly of total turn-key solutions.
LX is an innovative contract electronics design company specialising in the design of embedded systems and wireless technologies. We offer clients a professional turnkey experience, with services designed to take a new product idea from concept through to production. We focus on fully understanding all aspects of the clients' requirements and work on a tailored solution to ensure these requirements are met on time and within budget.

Our high calibre engineering team has 150+ years of combined product development experience and the team has won national and international awards. We have experience across a wide range of technologies and industries, and work with clients both in Australia and abroad.

We strive to develop long-term relationships with clients through:

- Ensuring a culture of innovation and creativity within LX
- Developing award-winning designs
- Providing industry-leading engineering expertise
- Leveraging extensive experience in a multitude of technologies & industries
- Ongoing commitment to our clients and their evolving needs
- Providing a professional outsourcing experience

CSIRO Future Manufacturing Flagship

CSIRO's Future Manufacturing Flagship aims to lead the development of cleaner advanced materials and manufacturing technologies to enable manufacturing companies to grow Australia's future productivity and prosperity.

Our research areas will meet the technological needs and deliver economic, environmental and social benefits across a number of industry sectors including:

Automotive
Aerospace
Defence
Textiles
Health
Building and infrastructure
Mining.

The expected outcomes will be:

Improving the flexibility and efficiency in production through new enabling technologies. Examples of these include direct, additive and digitised processes that allow the fabrication of materials to make complex objects or products layer upon layer, giving rise to the possibilities of mass customisation, a reduction of manufacturing steps and accelerated speed of production.

Reducing energy consumption and lower emissions and waste generation from manufacturing processes, moving towards zero-waste manufacturing.

Helping manufacturers create wealth from new products and services in new markets through 'Transformational and Disruptive Technologies'.


http://www.csiro.au/org/Future-Manufacturing-Flagship-Overview

The University of Sydney - Aeronautical Engineering

The School of Aerospace, Mechanical and Mechatronic Engineering at the University of Sydney is one of Australia's premier Engineering schools. It runs extremely successful undergraduate, postgraduate and research programs. The school is a major component of the Engineering and IT Faculty at the University of Sydney.

Ranked number one in NSW (AEN rankings) and 3rd in Australia, the University of Sydney is a world leader in Teaching and Research. Academic staff are involved in research areas including Biomaterials & Biomechanics, Combustion, Design Optimisation, Energy Production, Field Robotics, Fluid Dynamics, Materials & Manufacturing, Navigation & Control, Rheology, Smart Structures, Thermofluids and UAV Flight Systems. Staff are highly successful in obtaining ARC research funding and external competitive grants with industry.

Babcock International Group

Babcock Pty Ltd is the Marine and Technology Division of Babcock International Group serving Australia and New Zealand and based in Adelaide, SA. With representatives in Sydney and Canberra the combined workforce in the region is approximately 270, but worldwide around 26,000 skilled staff workers design, build, manage, operate and maintain assets that are vital to the delivery of many key public services. Our market-leading reputation is based on one key fact: Babcock is a partner which can be trusted to deliver.
CST Composites has been supplying carbon fibre tubing and components to customers worldwide since 1995.

The filament winding and pultrusion technologies and access to high-tech materials ensure that CST provides clients with the highest quality products on the market.

The CST team of engineers and experienced sales people mean that CST offers you the responsiveness needed to make your project a success.

Large projects or specialised one off parts involving carbon, fibreglass, aramid or other composite materials, filament wound, pultruded or resin infused, are all within the capabilities of CST Composites.

Whether working together with clients to develop design solutions or manufacturing to specification, CST can help you make the most of the unique advantages that composite materials have to offer.
Memko Pty Ltd is an Australian owned company operating in the defence and aerospace sectors and offers engineering services, technology and training to assist and support customers in advanced and highly regulated industries.

A Dassault Systems agent for supply of PLM tools and CAD/CAM technologies and with a CASA appointment in approving repairs and modifications to aircraft, Memko has an established track record of successful implementations.
BMT is a leading international multi-disciplinary engineering, science and technology consultancy offering a broad range of services, particularly in the defence, energy, environment, shipping and general transportation sectors. With around 1,500 professionals located in 60 offices in Europe, Asia and the Americas we draw upon a wide range of expertise to provide high-quality, high-value products and services. These help our customers operate their businesses in the most cost-effective, safe, reliable and environmentally responsible manner.

BMT WBM is an Australian subsidiary that was established in 1969 to provide specialist engineering and environmental consultancy services to a broad range of industries. Our professional engineers, scientists and technicians are highly qualified and collectively have vast experience in a broad range of fields. The benefits of these services are improved quality, robustness, reliability and availability of machinery, greater safety, avoidance of unexpected operational problems, extended life and lower life cycle operating and maintenance costs.

Aerospace & Mechanical Consulting Engineers Pty Ltd (AMCE)

CAPABILITIES: Aerospace & Mechanical Consulting Engineers Pty Ltd, trading as AMCE, is a professional engineering consultancy in the defence and aerospace sectors, providing engineering design, analysis and certification services to the Australian Defence Force for over 20 years. Using innovation and best practices, we deliver design solutions involving new capabilities, as well as running systems support, for fixed wing and rotary wing aircraft. AMCE also supplies products designed by the company, manufactured under subcontract, however, AMCE core business is engineering design, analysis and certification.
STATUS: Member of Panels: DMOSS (Defence Materiel Organisation Support Services), and ANSTO (Australian Nuclear Science Technology Organisation. Awards: ADM/DMO Team of the Year in the Rapid Acquisition Category and Minor Acquisition Category; Essington Lewis Trophy for excellence in collaboration with DMO.
Relegen Pty Ltd is a leading provider of enterprise asset and risk intelligence software, item serialisation, auto-ID, RFID, enterprise mobile applications and data improvement solutions to Defence and asset intensive organisations across Australia and around the world.
ISCA has lead research, prototyping and development of several innovative products and quality assured injection moulded and bespoke parts, partnering and guiding inventors and industry through the prototyping, 3D modeling and manufacturing process. ISCA is frequently required to re-engineer obsolence parts for the Australian Submarine Corporation and it's sub-contractors for the Collins Class submarines.

The company was awarded the Defence SME Trophy for contributions to Defence. Our state of the art production systems and product life cycle processes are highly regarded by the mining, medical, Defence and automotive industries.

Our customers include the Australian Department of Defence, Australian Submarine Corporation, Thales, BAE Systems, Babcock Integrated Technology, Siemens, Esso, Rio Tinto, Pempek, Caterpillar and Svitzer.

ISCA is often sought by industry to provide expert analysis and forensic investigation for seal technology.

Design + Industry Pty Limited

Design Industry is a product design and engineering consultancy. It is the largest and leading industrial design consultancy in Australia, specialising in the design and development of high technology business, industrial and medical and ruggedised products. We offer services from the initial conceptual design, through all stages of the engineering developments and into production.

· 25 years of operation with offices in Sydney and Melbourne
· Highly skilled international team consisting of 35 designers and engineers
· Outstanding reputation for achieving global design excellence
· Internationally renowned global leading clients
· Long lasting client relationships, locally and internationally
· Over 100 industry awards for design and engineering excellence
· Registered Research Agency endorsed by the Australian Federal Government
· 30% of revenue is generated by international clients
· Extensive network of proven suppliers and manufacturers worldwide
· Joint partner with Smart Design in the USA
A steel casting company since 1934
specialising in high alloy castings to the mining, Defence, Rail and industrial sectors. We have our own heat treatment facilities along with metallurgical and metrology facilities so we can produce highest integrity casting on site. There has been significant capital injected into our casting process include a fully automated process line so we can maintain speed, accuracy, repeatability and quality is at the forefront of our manufacture. We have extensive experience in both the local market as well as exporting around the globe to places like Russia, Chile, Angola, and the list goes on. Some of our large customers include BHP, Rio Tinto, Thales, Fortasque Metals, UGL, Bombardier and the like. The latest Defence project included R&D components for Hawkei vehicle. 3D Printing in Sand, Plastic, Paper and metal is a huge part of our business in R&D & End Used Parts
Advanced Manufacturing.
Inventis Limited is an ASX listed company involved in the design, manufacture, sales and marketing of products and services whose foundation is based upon ‘inspiration’ and ‘innovation’. Inventis Limited consists of the following business units:
Opentec is Australia’s original rugged computer specialist, we have been supplying rugged portable computers and technologies since 1994.
Steber International currently manufacture a range of commercial and recreational boats ranging in size from 20ft to 65ft for domestic and overseas markets. We also repair,refurbish and re-power existing craft.

Steber International have licensed technology from NSW company SolarSailor to develop, build and manufacture Steber Solar Sailor USVs (Bluebottles) for the markets of defence,security, oceanography, hydrography, oil and gas.

We have diversified into manufacturing a range of fibre-glass components to client requirements and have engaged in survey work and valuation reports for insurance companies.

Allied Data Systems Pty Limited

Allied Data Systems is an advanced high technology company whose primary focus is the development of embedded computing systems, supplying services, components and rugged systems to the defence industry.

Products are supported from a strong market position in niche areas of defence electronics.

Allied Data Systems represent the leading suppliers from around the world in markets in Australia and design, develop and manufacture for both local and export markets.
Romar Engineering is a contract manufacturing company servicing the medical, aerospace and industrial disciplines. We cater for the needs of large multinational companies through to start-up companies who require design, tooling, fabricating, moulding, assembly and packaging services in metal, plastic, silicone and rubber.
We are the customer’s choice for engineering solutions, providing local and international markets with high quality products since the 1970s.
Romar's showpiece is a DMG LASERTEC 65 3D 5-axis synchronous Laser Deposition, Welding & Milling machine.
This machine is able to produce complex 3D geometries as big as 500mm 10 times faster than conventional fabricating methods.
Capabilitiy to manufacture, repair or coat complex parts like turbine casings, turbine blades, impellers, propellers, multi material components, tubes and parts with internal features

Paratus Defence Advisors

Defence focused product development group and business advisory firm. The company undertakes consulting assignments in commercialising defence technology in Australia, UK, USA, Israel, South Africa, Europe and SE Asia.

Particular expertise in finding and assessing partners and subcontractors for complex defence projects. Also provide assistance in Mergers and Acquisitions in high technology and international ventures and in contract negotiations.

In depth experience in developing tender documents under a modified Hyman Silver methodology based upon experience of doing the same for a number of defence companies in Australia, UK and the USA. The principals have successfully tendered for over $2B of defence business and as a result have created a business development methodology and commercialisation model which is being used in some of the biggest defence companies around the world.
Baron is a global leader in the supply of silicone & rubber components, specialising in compounding, injection & compression moulding, post processing including sub-assemblies and testing for the aerospace & defence sectors.

Considered a leading manufacturing company specialising in precision silicone moulding, we have expanded our team and services to support the aerospace & defence sectors.

Thanks to our in-house tool room, Baron can provide rapid prototyping, precision moulds, assembly fixtures and a diverse range of manufacturing equipment to suit your every need.

With a focus on process validation and verification, we deliver reliable, efficient production processes that increase production throughput including the use of robotic automation.

With a key focus on PPAP we utilise the key principles of DFMEA, PFMEA & PCP to always deliver quality components to our Customers.

Located in Melbourne Australia, Baron will support your product development team no matter where they are located.

Forgacs Engineering Pty Ltd

Today it is Australia's largest privately-owned ship build, ship repair and engineering company employing 1000 people in two states, headquartered in Newcastle. Forgacs has diversified seven strategic marine and engineering sites on Australia's East Coast. Today the Company is one of only four Navy pre-qualified marine suppliers in ship build and repair. Forgacs also has robust job-generating businesses in commercial ship repair, mining equipment build, rail and infrastructure-build.Forgacs is the lead block builder on the $8 billion Air Warfare Destroyer Project ' significantly increasing the air warfare capabilities of the Australian Defence Force with one of the world's most advanced multi-mission warships. Forgacs recently expanded its Newcastle Defence Shipyard, taking over the ex-ADI harbour-front site on Newcastle Harbour. Forgacs is looking strategically at contracts such as the $1.8 billion SEA1180, future frigates and future submarine contracts to position the Company as Australia's leading major marine engineering contractor.


OEM Technology Solutions Pty Ltd

OEM Technology Solutions is in the business of providing solutions to the Rail Technology market, with a secondary market focus on the application of core rail technology capabilities into the wider transportation sector. These products and services are well suited to the Harsh Environment Defence transport or mobile related applications.

Specialising in the design and development of high technology products since 1993, OEM Technology Solutions combines technology, and innovative engineering and design services to provide turnkey solutions for our clients.

OEM Technology Solutions services include user requirements analysis, product specification, electronic hardware and software development, mechanical design and manufacture, production and testing, documentation and long term support.

Mostyn Enterprises (Technologies) Pty Ltd

Mostyn Enterprises (Technologies) commenced its manufacturing operations in 1967 with the development of a range of industrial annunciator alarms systems and power supplies for the aviation industry.
These have progressed over time to include single board computers and associated peripheral boards, including VME based computing engines.
For the past 30 years, the other arm of the company has represented International Companies in avionics, navigation, 3D sonar, sonar sensors and RF products.
Mostyn Enterprises proudly support the Royal Australian Artillery Historical Company.

Australian National Fabrication Facility

The Australian National Fabrication Facility (ANFF) is a provider of research and development infrastructure primarily relating to micro and nano device fabrication, and advanced materials synthesis. It's capabilities generally support Australian Nanotechnology providing capabilities such as micro CNC milling, laser machining, lithography, semiconductor processing, 3D printing, optical fibre fabrication, printed electronics.

Being funded by the Australian Government, ANFF's facilities are available to the public,

Nepean Engineering and Innovation

Nepean Engineering and Innovation is a family owned company and one of the largest Engineering firms in Australia, specialising in Mining, infrastructure, Aerospace, Defence, Scientific, Rail and Transport. Current





















StopRotor Technology Pty Ltd is a small, innovative company responsible for the flight testing and development of the Hybrid RotorWing UAV aircraft (patent pending). The Hybrid RotorWing is a new stopped rotor class of aircraft. It can operate as either a fixed or rotary wing aircraft and is capable of in flight transition between flight modes. The Hybrid RotorWing maintains the characteristics of a useful and practical aircraft, can provide a stable transition envelope for in-flight transition between flight modes and is capable of conventional, short or vertical take off and landing operations to suit mission, location or payload requirements.
Development will commence in the UAV sector.
StopRotor Technology is looking for collaborative partners to fulfill the next phase of development. Please contact us for more information.


Alpha Group Industries

AGI is an Australian based, global capability solutions provider comprised of an alliance of leading industry Original Equipment Manufacturers (OEMs), specialist Service Providers, and a network of FVEY community veterans – both combat operators and support staff from the logistics, intelligence and other specialist support fields, with extensive operational experience across all mission profiles. Through personal experiences, our team understands and is focused on the relentless pursuit of the very best equipment, mission support and logistics solutions our frontline operators deserve. We believe through close alliance and sustained investment in an enduring program of force modernisation, AGI is able to work with our clients to address real existential security concerns across the sea, air and land domains.

Australian Business Foundation

The Australian Business Foundation is an apolitical, non-profit, independent institute for research on business competitiveness. It's research focuses on contemporary and emerging issues that may impact on business in the medium and longer term.

The Foundation undertakes its research in collaboration with expert scholars and practitioners from Australia and around the world. The Foundation nurtures evidence-based research into business innovation and sustainability, emerging models of business competitiveness, and opportunities arising from the knowledge economy.

The Foundation is an approved research institute and deductible gift recipient under Australian taxation laws.

Medina Engineering Pty Ltd

Medina Engineering have been in operation since 1974 and have a large state of the art CNC machining workshop supported by fabrication facilities enabling the supply & manufacture of components required for a diverse range of industries.

This includes 2 new Mori Seki 5 axis multi tasking CNC machines.

We have ISO 9001 Accreditation for the last 5 years.

We are based in Sydney Australia but supply globally. We have recently supplied equipment into Washington, Texas & Florida in the USA as well as all over Australia and Asia. 
Parker Hannifin is the world's leading diversified manufacturer of motion and control technologies and systems, providing precision-engineered solutions for a wide variety of mobile, industrial and defence markets. The company employs approximately 58,000 people in 49 countries around the world.

Steele Environment Solutions Pty Ltd

"Advanced powder based materials" manufacturing equipment for bespoke materials manufacture. The materials are of bespoke design too. The materials are for unique applications for the defence sector. Application are all extreme, being for extreme temperature, chemical attack, radiation resistance and low friction properties

Milspec Manufacturing Pty Ltd

Milspec Manufacturing Pty Ltd is an engineering company engaged in the contract manufacture of industrial, commercial and military products. Our customers include a variety of government departments, rail, utilities, telecommunications and infrastructure organizations as well as many Australian and International defence agencies.
We work in close partnership with our customers to ensure that we provide not only an excellent product but an excellent service.
Mondo specialises in sourcing hard to get parts and obsolete products. However in saying that, we also supply standard product to many companies.

We operate as an independent distributor of electronic components.
We offer a competitive price on most part and have found in many cases we can offer better pricing than our competitors.

Mondo has offices around the world in the UK, America and throughout Asia allowing us to have visibility of stock on a local level and being able to negotiate better pricing on short lead-time items at that same local level.

As well as the ability to operate globally for customers, that need the support in all regions of the world, we have associations with testing houses to be able to offer the confidence that the products we over will work.
Engineering, project management and manufacturing for all industries.

Australian UAV Technologies Pty. Ltd. (T/A Silvertone Electronics)

Australian UAV Technologies Pty. Ltd. (T/A Silvertone Electronics) is an Unmanned Aerial Vehicle (UAV) design and manufacturing organization based in Wagga Wagga, NSW. Silvertone has a 4m wingspan fixed-wing UAV with a highly flexible, configurable 8kg payload capacity and 20+ hours endurance suited for ISR missions, communications, survey or other as required. Silvertone has partnered with Australian companies to maximize the Australian content of its innovative platform and payload offerings. It engages with CASA, defence and agencies within Australia and the region to promote the UAV sector and Australian participation in the industry's growth.
For over fifty years Universal Gaskets has manufactured high quality pipe flange gaskets, electrical isolation kits, diaphragms, heat and electrical shields, seals, spacers, packers, slip pads, filters, metal and non metallic washers and other shapes for industry. We also stock a variety of seals and pump packings.

Our customers are manufacturers, wholesalers and service providers in many industries including transport, water & waste water treatment, power generation & distribution, oil & gas processing, industrial maintenance, hardware, healthcare, electrical, electronics, air conditioning, mining, defence, consumer goods, and many others. We sell nationally and export to Oceania, SE Asia, China and India.
I'm an independent military historian, researcher, analyst, experimenter, designer, and developer of concepts and systems intended for Australian project delivery

Cirrus Real Time Processing Systems

Cirrus delivers software-based information systems, sensor and signal processing, data acquisition, recording, training and communications solutions to Defence customers when it matters'in real time. Cirrus provides simulation systems for training in mine-hunting, air combat and helicopter control to RAN (Mine Warfare Faculty), RAAF (School of Air Warfare) and export clients.

Electronic Components Pty Ltd

Electronic Components Pty Ltd are wholesalers of connectors, transistors, diodes, resistors, LEDs, capacitors, Integrated Circuits and components of all types.

We utilise global sourcing to find hard-to-find or obsolete components as well as provide world-best pricing for current standard components. We stock hundreds-of-thousands of components and take pride in providing a complete cost-effective sourcing solution. We source & quote BOMs or individual components and will stock long lead-time items that are critical to your operations.

Our emphasis is on superior customer service, cost-effective pricing and shortest lead times whilst ensuring quality and accuracy of supply.

We build learning relationships with clients where we help reduce your component costs whilst supporting the scheduling of your manufacturing runs and R&D prototype development.

Send us your BOM or individual component requirements and allow us to pleasantly surprise you at what can be achieved.
MicroTau is a microfabrication company specialising in a novel method of directly printing functional microstructures onto any number of surfaces that is economical, fast, scalable and durable. We are presently developing this technology with the US Air Force for application of drag-reducing riblet microstructures onto transport aircraft to reduce fuel burn. We are exploring other functional microstructures for marine applications including anti-fouling surfaces.
Leading supplier to Defence of specialised military shelters, vehicle bodies, trailers and aircraft ground support equipment with over 25 years experience in design, manufacture, equipment integration, testing and supply support to both australian and international specifications and standards. Major customers include ADF, DMO, Boeing Defence Australia, Mercedes-Benz Asia Pacific, BAE Systems, GDLS-A, Lockheed Martin, Northrop Grumman, Thales Australia, Raytheon Australia and Australian Aerospace.
Amatek Design is a full service electronics engineering design consultancy that provides expert product development services to a diverse range of clients across an equally diverse range of industry and technology sectors.
Areas of capability include Embedded Electronics design, Embedded Software development, Desktop, Mobile and Web Application development, Test and Certification services, Turnkey Product development.
ATSA Defence Services provides a complete range of capabilities for repair and overhaul of electrical and electronic equipment.
Capabilities
· OEM Support partner for electronic, electrical and electro-mechanical systems
· Development of support programs "from scratch" to meet customer requirements for the life of the equipment
· Routine and breakdown maintenance conducted by skilled electrical technicians, supported by humidity controlled workshop and underwater test tank
· Engineering staff with skills in design & repair, reverse engineering and obsolescence
· Specialist cable supply and termination and system component manufacture, including fibre optic
· Defence grade painting facility
· Defence Systems Engineering and Project Management
Discriminators
· Complete equipment life-cycle support - "one stop shop"- including:
· Planned and corrective maintenance history reporting to CI level
· Workshop and shipboard service
· Installation, set-to-work, harbour & sea trials planning and implementation
* software, electronic, electrical and electro-mechanical design
· Ideally suited for short-run, complex systems for harsh environments
Established in 1986, Pacific Engineering Systems International Pty Ltd, or Pacific ESI, are consultants specializing in the effective use of information technology by technical end-users such as engineers and scientists across various disciplines. We offer a unique blend of engineering, computing, management & system skills to assist our clients with the design, development and implementation of software and systems so that these tools provide the information and insigfht that our clients need.



Quickstep Holdings Ltd

Manufacture of carbon fibre composite parts for Aerospace
Process design for carbon fibre composite curing for Aerospace and Automotive and licensing
Artis specialises in the design, development, management, integration and support of mission critical applications for leading Australian organisations.

Key to this is Artis's people and processes. We employ advanced thinkers who are leaders in their areas of expertise.

Artis maintains long term client relationships by listening and demonstrating business understanding in everything. The company utilises well developed processes, tailored to minimise risk and maximise value.
Laughing Mind is a consulting firm creating Empowering Digital Possibilities. We help clients integrate scalable on-premise and cloud-based systems, leveraging our role as Atlassian Experts with national scale project experience, blending best of breed solutions with smart, portable clean tech energy products. Our Collaboration, Community and Project systems connect thinking and productivity across time, people, place and purpose using Service Design tools, placing people at the centre of service, systems and process design. With project expertise in Human Factors, Healthcare, Digital Services and Asset Management, we help our clients find balanced solutions in the complex mix of business needs, technology, human factors, portable power and workplace health. Our portable solar product range works to keep mobile workforces powered up, connected and delivering with lightweight, robust clean-tech solutions from GoalZero and other alliance partners. Recognised at LandForces 2014 as an SME Innovation finalist, we are responsive to Defence operational needs.
We have assembled a team of world-class scientists, physicians and national security practitioners that together develop cutting edge capabilities across the life sciences. 
Liberty's leadership team holds academic chairs and are professors at the world's leading academic institutions, to include: UNSW, Harvard, Stanford, Cornell and Washington University, St Louis.  
Liberty's national security membership includes former Presidential appointees and senior officers of the U.S and Australian Intelligence Community, U.S. Department of Justice, Department of Energy and elite operators drawn from the U.S and Australian militaries.
Established in 2014, VisionFlex specialises in the design & manufacture of high quality imaging solutions for the healthcare & related sectors.
Visionflex provides world-leading imaging solutions based on new technology, intuitive software & ergonomic design.
Visionflex’s flagship product, the ProEX, is a multifunction medical imaging system & supports a variety of high-quality imaging probes. Included is an integrated video conferencing system for remote consultation, enabling users to share high quality images & video with other practitioners for diagnostic purposes.
The ProEX provides an ideal tele-health platform for remote sites, military installations/camps, ships & oil rigs.
The Visionflex team is committed to designing industry-leading medical devices that are effective, elegant, easy to use, & which conform to the most stringent customer & regulatory requirements. Visionflex maintains a certified Quality Management System through a systematic approach to risk management.

Western Sydney University

Researcher at the MARCS Institute at Western Sydney University working on neuromorphic vision and cognition systems for navigation, autonomy, and space imaging.